49 guides · Updated 10 November 2026
Getting started
Set up your workspace
- Start your 14-day trial and enter your company details.
- Open Settings → General to review company information and your logo. Review Our legal requirements for the applicable OHSA / MHSA duties.
- Invite company users under Settings → Users and configure responsibilities under Settings → Roles.
- Choose your bundle and additions under Settings → Modules & subscription.
Important: Detected legal duties need a manager's acceptance; selecting a role or adding a user does not complete safety requirements.
Move from your old system
- Open Settings → General → Import from old system for supported imports, or use the employee or asset bulk-import screen.
- Upload your original Excel or CSV export. Select the worksheet and header row where offered, then match the columns.
- Review names, identifiers, dates and active/archived status before saving. Keep leading zeros in ID numbers.
- Import supporting files separately through Settings → Documents → Bulk document upload and review their proposed destinations.
Important: Only supported record types can be imported. Review the result rather than assuming every old-system field was transferred.
Bulk-upload and match documents
- Open Settings → Documents → Bulk document upload and select up to 100 files.
- Review the proposed document type, employee, asset or folder for each file.
- Search the employee selector by name, surname or ID number and correct any uncertain match.
- Save only after checking the destinations. Review submitted evidence in Company → Approvals where required.
Important: Automatic reading and filing are not document approval.
Subscribe and pay through PayFast
- Open Pricing on safetyspecialistservices.co.za and choose monthly or annual billing.
- Choose your bundle, review its included capacity and add any extra blocks or user spaces you need.
- Review the total, recurring amount and once-off onboarding charge where applicable, then choose Continue to payment.
- Complete payment on PayFast and return to SSS. Your paid access activates only after PayFast confirms the payment.
- Check Settings → Modules & subscription for your paid-period dates. Contact SSS support if you paid but access has not updated.
Important: PayFast is the only payment provider. Never send card details, passwords or payment passphrases to SSS support. Returning from checkout alone is not payment confirmation.
Phone & desktop portal
Set up the Employee Portal
- Get the company Employee Portal link from Settings → Employees.
- An authorised leader issues your setup code under Employees → Settings → Access & devices.
- Open the link in Chrome or Safari on your phone. Enter your employee number and setup code, then choose Register fingerprint.
- Follow the phone's fingerprint/passkey prompt. Add the portal to your home screen if desired.
- Open My profile to complete your photo, registered signature and required POPI declaration.
Important: Use your own identity and registered device. If setup fails, ask your supervisor or use SSS support.
Conduct a pre-use inspection on your phone
- Sign in to the Employee Portal before using the equipment. Open Documents → Requests → Working documents, or open the relevant bell notification.
- Choose the assigned pre-use checklist. Check the asset, project and due date; use the project filter if you work on several sites.
- Open the working document and any required attachments. Inspect the actual asset and answer every required checklist question truthfully.
- Select Asset inspected when offered. Add completion notes and supporting photos or files for faults or observations. Save answers keeps progress only.
- Choose Start if shown, then Submit or Sign with fingerprint & submit as required. Confirm the signature consent and phone identity prompt where applicable.
- Reopen the record to check its status. If it requires supervisor acceptance, submission alone is not final completion.
Important: If no checklist or matching asset is available, ask your supervisor to check the assignment. A saved answer, uploaded photo or pre-use submission never replaces required tagging or a lifting certificate. Do not use unsafe equipment; report defects to your supervisor.
Handle supervisor equipment checks on your phone
- Open Documents → Requests → Supervisor checks in the Employee Portal.
- Open the task and confirm the asset and project.
- Use Give this check to to select project employees and Send to them, or answer the checklist under Do it yourself and choose Complete & sign.
- For an available daily task that will not be used, choose Mark not used today; this records non-use, not a passed inspection.
- When an employee has submitted a check, reopen the task and choose Sign inspection if offered. Confirm each action with your registered fingerprint.
Important: Only the accountable project leader sees these actions. If the supervisor is absent, the acting-supervisor/manager routing applies. Employee completion does not remove the supervisor's sign-off.
Link your desktop portal
- Open the desktop portal and display its pairing QR code.
- On your signed-in phone, open the dropdown → Linked devices and use the portal's scanner.
- Scan the exact SSS desktop QR and approve the pending pairing with your phone.
- Use the linked desktop for the actions available to your role; complete phone identity confirmation when requested.
- Remove devices you no longer use from Linked devices.
Important: Pairing does not grant another employee's identity. Authorised company access is separate and cannot sign on an employee's behalf.
Respond to a breakdown job offer
- Sign in to your Employee Portal and open Breakdown jobs from Home, or open a breakdown-job alert.
- Review the company, job details, location, dates, occupation quantity and job contact. You can review offers without clocking in.
- To accept, tick the consent box confirming that your name, contact details, current employer and current employee documents may be shared with that company for this request, then choose Accept offer.
- To refuse an awaiting offer, choose Decline. If you already accepted, use Withdraw acceptance & stop sharing when you no longer want to participate.
- Check the offer status. An accepted company may contact you and review your current documents before sending an invitation; accepting is not itself a project assignment or new employment.
Important: Your information is shared only for the specific accepted request while it remains open. Closing the request or withdrawing acceptance stops that sharing.
Clock in, clock out or record absence
- Sign in and tap the clock icon beside the bell.
- For clock-in, choose the correct project and tap Clock in, then confirm with your registered fingerprint.
- To leave, reopen the clock icon and choose Clock out for the displayed open shift.
- If not working, use the absence or leave options in the same popup and provide the requested information.
- Review your recorded hours under Attendance.
Important: For a phone failure or paper-attendance project, ask the authorised supervisor to use the appropriate assisted/paper process. It is not employee biometric clocking.
Upload personal documents
- Open My profile → Upload personal documents, or Documents → Upload personal documents.
- Select the correct type, such as CV, ID, driving licence, medical or qualification certificate.
- Upload or scan the document and supply the requested dates and details.
- Capture both the front and back of ID cards and driving licences (a passport needs only the photo page). Qualification, training and certificate uploads wait for manager approval; other types are accepted once the automatic check passes.
- Submit and check the status in your document history. Correct returned submissions using the recorded reason.
Important: Uploading does not make a certificate approved, valid or sufficient for a job.
Read and sign assigned documents
- Open Documents → Requests and choose Working documents, Document acknowledgements, Toolbox talks, My permits or the relevant section.
- Open every required attachment and read the content before signing.
- Complete any required answers, confirm the consent and use the displayed signature action.
- Confirm your own fingerprint/passkey when requested and check the recorded status.
- Find retained copies under My documents or the relevant record's history.
Important: Viewing is not signing; a signature is not automatically approval. Camera-review fallback is available only where explicitly offered, requires a fresh photo and stays pending human review.
Choose notification and message sounds
- In the portal, open the dropdown → Sounds. In the company app, open Settings → Sounds.
- Preview a sound and select your preference, or choose Off.
- Allow phone notifications when prompted if you want supported push reminders.
- Use the bell to review prompts even when sound is off.
Important: Sound choices are per device and do not change due dates or record status. Phone/browser notification permissions still apply.
Daily safety work
Create and complete a job safety assessment
- The on-duty supervisor opens Project → Daily Operations → Job safety assessments and creates a new assessment for the specific job before it starts.
- Enter the job scope, location and planned start. Complete the mapped JSA / SLAM questions, or assign a project employee to prepare them while retaining supervisor final sign-off.
- Select everyone involved and run the scope qualification checks. Review required training, certificates and qualifications for each person; scaffold/height work, confined-space work and rigging have their own evidence requirements.
- Resolve missing or invalid evidence or exclude the person from that job. Prepare the risk briefing and request each participant's acknowledgement.
- Detected missing permits are requested from the designated issuer; a request does not issue a permit. Every remaining participant must sign and required permits must be resolved.
- The supervisor reviews and approves in the app, phone portal or linked desktop portal with the required individual identity verification.
Important: Creating a general task does not itself create a JSA. Start a separate JSA for each job. Automated scope analysis assists the review; missing or uncertain requirements must not be treated as clearance.
Remove an unqualified person from a JSA
- The on-duty supervisor opens the unfinished assessment and reviews the participant qualification warnings.
- Before the briefing is sent, untick anyone who will not take part.
- After the briefing is sent, use Remove from this assessment beside the person in the app, phone supervisor review or linked desktop portal.
- Enter the reason and confirm Remove. Recheck the remaining team and qualification results before approval.
Important: Removal is available only before final sign-off and cannot remove the last participant. The removed person is notified, the reason and history are retained, and other participants' signatures stay unchanged.
Conduct planned task observations
- In the project, open Daily Operations → PTOs and link the relevant safe work procedures.
- Review the generated schedule in List or Matrix; use Download schedule for the currently filtered schedule.
- The accountable supervisor opens Documents → Requests → Conduct planned task observations on the phone and selects the scheduled observation.
- Observe the employee doing the task, record findings and corrective actions, then complete the supervisor identity/signature action.
- The employee opens the resulting working-document request, views the recorded observation and signs it personally.
Important: Schedules are spread across the project; critical tasks repeat at least every six months. Supervisors, managers and inspectors are not PTO recipients; inspectors do not conduct these project procedure observations.
Conduct and sign a toolbox talk
- Open Project → Daily Operations → Toolbox Talks and select the topic and participating crew for the talk.
- The assigned conductor opens the talk on the portal and presents the content to the crew.
- Each employee opens Documents → Requests → Toolbox talks, views the talk and chooses Sign attendance.
- Review the attendance/signature register and follow up on outstanding people.
Important: My talks refers to talks assigned to you to conduct; All talks includes the other talks visible to you. Opening a talk is not attendance signing.
Request and resolve work permits
- Open Project → Daily Operations → Permits to review the project's permit records and requests.
- Ensure the project's designated issuer is configured, including the client's issuer when applicable.
- For a JSA, review the automatically requested missing permits with the issuer.
- The authorised issuer completes the permit's own signing workflow, or records an accepted client-signed paper copy through the supported paper process.
- Recheck the JSA before supervisor approval.
Important: A permit request, draft or navigation action does not authorise work. Only the authorised permit workflow resolves the requirement.
Report an incident and follow up
- Open Incidents in the app or Report incident in the portal. Choose the correct project before recording the occurrence.
- Enter the details, classification and supporting evidence, then submit the report.
- Company managers schedule the investigation team; assigned people record their findings and evidence.
- Record corrective actions, responsible people and due dates. Assignees submit implementation evidence.
- The authorised manager verifies corrections and makes the separate closure decision.
Important: Reporting, investigation, action completion and closure are distinct steps; a reporter cannot assume the case is closed after submission.
Schedule and record an emergency drill
- Open the project's Emergency & incidents → Emergencies & drills.
- Use Schedule drill to record a planned drill and review the drill calendar.
- After the practice takes place, record the actual drill, attendance, findings and required signatures/evidence.
- Record and follow up on corrections; review the completed practice and its configured next due date.
Important: A calendar entry is not a completed drill. Opening the emergency workspace does not activate an emergency.
People & projects
Add employees and link job evidence
- Open Employees → Company employees and add the employee, or use the employee bulk import.
- Open the employee's Overview/profile and upload their qualification, medical and induction evidence.
- Choose the main occupation from company Occupations and secondary roles from Training types / qualifications.
- Link the previously uploaded employee documents supporting each assignment.
- Review submitted evidence through Company → Approvals where required.
Important: A role assignment or an attached file does not establish qualification validity, approval or project compliance.
Create a project and link resources
- Open Operations Hub → Projects & files and the appropriate project register, then create the project. New projects start as drafts.
- Set the client/internal details and project dates; only authorised administrators edit project details.
- Open Resources → Employees → Employees and use Link employees. Tick several people or Select all shown, check each person's ID/passport number and occupation, then choose Link selected.
- Link internal assets and safety documentation, and configure project leaders. Publish before linking external contractors or clients.
- Review outstanding documents inside the relevant compliance headings and use the project's Publish control when the key setup is complete.
Important: Employment and project membership do not automatically satisfy compliance. Linking resources does not copy another company's private files. Draft projects do not start new operational prompts or notifications.
Prepare, publish, schedule or pause a project
- Open the draft project or division and finish its setup. Publish before creating new client/company links or external shares. Existing relationships and internal crew access are retained.
- Ensure it has a project name and start date, a named supervisor under Responsibilities and at least one linked employee.
- An admin or manager selects Publish, reviews the key setup checklist and chooses Publish now. To start later, enter a future date/time under Start later and choose Schedule.
- To stop new operational prompts and notifications without deleting records, select Pause and confirm Pause prompts. Use Resume now when work should restart.
- Use Return to draft only when the project or division should go back to silent setup. Publish every project separately; publishing a division does not publish its projects.
Important: Draft, scheduled and paused states suppress new operational prompts and notifications; they do not erase existing records or disable real emergency alerts. No backdated prompt run is created when scheduling.
Request resource labour and review candidates
- An admin or manager opens Employees → Resource labour and chooses Request labour.
- Choose a specific registered company or publish globally. Enter the job, location, dates, work details and contact information.
- Select each occupation and enter its quantity separately, then choose Notify available people.
- Available matching employees accept or decline in their own Employee Portals. Before acceptance, their identities, contact details and documents stay private.
- Open Accepted candidates to contact to review the people who accepted, their contact details and current employee documents before choosing Invite for job.
- Close the request when it is filled or no longer needed. This stops request-scoped contact and document sharing.
Important: Acceptance shares information for that request only; it does not transfer employment or project membership. Use the appropriate invitation, project-linking or labour-hire workflow afterwards.
View and edit the project organogram
- Open the project and choose Organogram from the right-hand action.
- Review the project employees, responsibilities and appointments. People at the lowest reporting level are grouped under their occupations.
- An authorised admin or manager chooses Reporting line, ticks one or more people/responsibilities (or Select all), chooses the position under Reports to and saves the reporting lines.
- Use Add additional project role to record an extra role. Retry any people left selected if some reporting lines could not be saved.
- If needed, choose Add to File View to save a PDF snapshot to a selected folder.
Important: The chart shows recorded relationships; it does not appoint or qualify a person. Circular reporting lines are rejected, and a saved PDF is a dated snapshot.
Release an employee or asset from a project
- For an employee, open the project workforce employee list and use its unlink/remove control.
- For an asset, open its Asset Register project/location entry and use the project unlink action.
- Check the selected employee/asset and project, then confirm the supported action.
- Refresh the linked-resource list and verify that the project link has been removed.
Important: Employee records and historical evidence remain. Asset release is blocked while the asset is hired in or signed out; end the relevant agreement/custody correctly first.
Hand a crew over to a client project
- The employer links the crew to the client project — employees are not duplicated.
- The client assigns the supervisor and prompts on its project.
- The employer keeps the employees' records and documents.
- Either company can release the crew, giving a reason.
Assets & chemicals
Register assets and assign drivers
- Open Asset Register and choose Equipment, Machinery, Vehicles or Lifting Equipment.
- Add the asset, scan its existing QR where applicable, or import an Excel/CSV category register.
- Review its type, capabilities and compliance classification rather than relying on the register category.
- Assign drivers/operators using their existing approved qualification/licence evidence and the vehicle's configured code/PDP requirements.
- Set the opening odometer/hour reading and service interval where applicable.
Important: Unclear classification stays Classification review required. PPE and chemicals are stock, not tagged assets.
Find hosted customer equipment
- Sign in to the inspection company that keeps the customer records.
- Open Asset Register → Hosted equipment, beside Company assets. You can also search for Hosted equipment in the app search.
- Choose the customer to view their saved equipment and inspection dates.
- Authorised admins and managers use the customer's existing controls to schedule inspections or send a workspace invitation.
Important: Company assets remain separate. Opening hosted equipment does not move assets, change hosting charges or give another company access.
Request or offer machinery and equipment
- An admin or manager opens Asset Register → Machinery requests, immediately after Signed out, and chooses Request machinery.
- Choose one registered company or all companies with available equipment. Add each machinery/equipment description and quantity, the location, required dates, work details and contact information, then publish the request.
- A receiving company opens Requests for your company, ticks its own available assets and chooses Offer selected. It may add rates, operator, transport or condition notes.
- The requester reviews Asset offers and chooses Shortlist offer or Decline. Contact the owner and choose Arrange signed rental after shortlisting.
- Complete the existing signed rental under Assets → Rentals before use; close a request when it is no longer needed.
Important: A request or shortlisted offer does not transfer ownership, link an asset to a project or reserve it for use. The signed rental workflow and its availability checks remain required.
Set up automatic pre-use checklists
- Open Settings → Documents → Working documents → Inspection formats and upload the company pre-use form.
- Review its converted on-screen checklist; the original form remains available as a reference.
- Open Requirements → Pre-use inspection — machines, vehicles & equipment and tick the exact assets.
- Under Automatic prompts choose How often and save. Ensure the relevant drivers/operators and project supervisor are assigned.
- Drivers/operators receive asset-linked requests; project equipment routes to its accountable supervisor, who can assign the check or perform it.
Important: Occupation selection is not the pre-use routing mechanism. Asset settings covers tagging and third-party lifting inspections, not daily pre-use checks. A failed conversion or missing prompt needs review, not an assumption that a check is complete.
Request a lifting inspection
- Open the lifting inspection/request controls from the lifting register or asset.
- Select the eligible assets that are missing an inspection or are expired/due under the configured rules.
- Choose the inspection company, then select one of its registered inspectors.
- Review the suggested equipment-specific certificate for each asset. Change the selection if its wording differs, and confirm that it actually covers the equipment being inspected. Send the request only with valid certificate evidence.
- The assigned inspector accepts and schedules the work, verifies the asset QR and completes the inspection using their checklist.
- Review the recorded findings and issued certificate and follow up on defects.
Important: The suggested match is not proof of equipment coverage. Expired or rejected inspector certificates cannot authorise a request. Pre-use, tagging and lifting inspection are separate; equipment still within its certificate date is not made selectable simply by changing a filter.
Use personal inspector checklists
- Open Inspections → My inspector checklists in the app and upload the inspection form or edit your existing checklist.
- In the portal, open Inspections and the Requests, Scheduled, Completed or My checklists popup.
- Accept/open your assigned inspection and confirm the requested asset's QR; use the explicit choice to keep the assigned QR or use a customer QR.
- Complete the checklist, findings, photos and required inspector sign-off.
- Use the certificate's authorised sharing options where offered.
Important: Personal checklist access requires the inspector's identity check. Only the owner can delete a personal checklist; deletion retains historical inspection evidence and never changes the assigned asset.
Record fleet logs and haul trips
- In the app, use Operations Hub → Hire, transport & deliveries for haul trips and rosters.
- Assign the truck, trailers, driver, dates and project where applicable.
- On the portal, the assigned driver opens their travel-log or rostered trip prompt and completes the asset's required pre-use checks before driving.
- Record readings, route/destination for vehicles or task/location for machinery; for haul trips add load/offload details, tonnage and tickets.
- Submit and review the trip/log register and service-due alerts.
Important: Company-level trips need not belong to a project; roster-created trips retain their assigned project. Recording a log is not a substitute for driver eligibility or pre-use inspection.
Maintain chemical SDS dates and storage
- Open Chemicals → Stock and add or edit the chemical, quantity and SDS.
- Upload the current SDS. Review the extracted issue/revision date and five-year review date; confirm unreadable dates manually.
- Open Storage to review the SDS-based compatibility matrix and use View for storage recommendations or pair evidence.
- Check the cited SDS for the actual product and resolve missing, outdated or mismatched documents.
- Link company stock to the project and review its separate chemical-training requests/register.
Important: Replacing an SDS clears its old dates. Unknown evidence remains unknown; no detected conflict is not proof of compatibility. Automated SDS reads can incur AI usage.
Prepare chemical transport and delivery checks
- Open Chemicals → Transport and enter the substance, quantity, UN number, hazard class, origin and destination.
- Choose the in-service vehicle and driver with approved current dangerous-goods permit evidence.
- Attach the required declaration and TREMCARD and save the consignment.
- The selected driver opens the delivery working-document request on the phone, checks the consignment and completes the required pre-departure checklist.
- Record faults honestly and use the required signature action; review the resulting delivery inspection separately from the trip.
Important: Failed checks must not be treated as permission to depart. Delivery checks do not replace fleet pre-use checks or permit requirements.
Documents & administration
Organise safety documents and appointments
- Open Settings → Documents and choose General, Safety documentation, Working documents or Safety Campaigns.
- Use Add folder and Add document inside the appropriate section or folder.
- For occupation appointments, open Safety documentation → Appointments → Occupation appointments → Link occupation to appointment.
- Choose the occupation and applicable uploaded OHSA / MHSA appointment. Use the project's appointment workflow for completion/signing.
- Open Retired documents to inspect retained older documents.
Important: General stays private. Uploads do not need library signer setup; operational appointment and document signatures remain required.
Assign project documents and check signatures
- Open the project's document sign-off/assignment controls and choose Assign documents.
- Select employees and documents, then check the selected-only review before sending.
- Employees open the request, read every required document and sign personally.
- Open Assignment register to review the recorded signatures, including separate document-type registers.
- For library switches, Send to complete or Send to view sets link eligibility; it does not send immediately. Send to contractors opens the recipient/due-date choices.
Important: An outstanding request is not a signature. Shared General documents are not available to contractors.
Choose generated register formats
- Open Settings → Documents → Working documents → Registers.
- Select the supported generated register and choose System format or link the company's own format.
- Open the relevant project register and generate/download it from the recorded entries.
- Check the actual signatures, dates and continued pages; absent signatures remain blank.
Important: Registers are system-generated, not blank uploaded records. Changing a format changes output, not stored signatures; System format restores standard output.
Choose and complete Employment Packs
- Open Settings → Documents → Working documents → Employment Packs and select Use as company format where required.
- View the selected format in Settings → Employees → Settings → Job specifications.
- When an employee joins a project, open the automatically prepared pack in project File View and review its client-specific requirements.
- The employee signs first, followed by the project supervisor/manager representative. Record the client signature where required, including the supported client-signed PDF upload.
- The pack completes automatically once all required signatures are recorded; return it for correction if necessary.
Important: Matching client formats take priority over the company default. Saved snapshots do not change with later format edits; a pack does not itself certify induction or competence.
Create a client pack from an index
- Open Settings → Documents → Client formats (SSS or the client) and choose Create client pack.
- Select the pack type — Safety, Working or Fleet — and whether it is an Index only file or a Complete pack.
- Upload the client's index. The system reads the headings and builds the file layout section by section; review and correct the headings.
- For each section choose: Include client original, who signs (Client and/or Contractor, with full signature or initials; client signers need name, surname, designation and email), auto-complete information and date, Extract employee information per employee, and Allow additional files in File View.
- Use Choose… to tick the system documents to attach (sections and subsections), then save. Generate the pack from the project's File View.
Important: Label blank spaces on client formats, e.g. [Contractor name], [Designation], [Vendor], [Date], [Client Signature], [Contractor Signature] and [Contractor Initials], so they fill automatically. Initials print in the right-hand open space. Sections without Allow additional files are greyed out in File View.
Share files and project views
- Open Operations Hub → File Sharing Hub to review incoming and outgoing shares.
- Use the original document/project sharing action, select permitted recipients or documents and confirm what will be shared.
- For an external view-only project link, use Share Project and include only the intended documents.
- Review or revoke the share using its existing controls.
Important: Shared views remain permission-scoped; a private view-only link is not editing or signing access. General company documents remain private.
Review approvals and current certificates
- Open Company → Approvals and filter by record type, project, status or submission date.
- Open the original record and inspect its authorised evidence, dates and required signatures.
- Use the record's permitted approval/rejection action and record the required reason.
- Review retained rejection or superseded history separately from the current certificate.
Important: Queue visibility does not grant approval authority. A newer upload cannot approve itself or replace a valid current certificate merely because it arrived later.
Review and withdraw phone activity
- Open Company → Phone activity or an employee's Phone activity section.
- Review the recorded created/sent/opened/signed chain for the selected request.
- An authorised company supervisor/leader can withdraw an eligible unsigned item using the supported action and reason.
- For supported signed records, an authorised manager/admin uses the separate revocation action; check the retained history.
Important: Opening is not signing, and withdrawal does not erase signed evidence. Actions stay company-scoped.
Set company code prefixes
- An authorised administrator opens Settings → Company → Codes.
- Set the company prefixes for employees and the supported asset categories.
- Save, then check the next newly created record's generated identifier.
Important: The system allocates codes; changing a prefix does not rename existing or imported identifiers.
Generate and export Excel reports
- Open Reports and search for the required report.
- Choose the available company/project/division scope and filters. For an expiry report, select the intended project rather than Whole company when only that project's records are required.
- For the new resource reports, open People → Resource labour requests or Assets → Machinery & equipment requests. These company-wide reports include sent and received requests, quantities, responses/offers and status.
- Generate the report and check the applied scope and recorded totals. Choose Excel to download an .xlsx workbook or Print/PDF for a printable copy.
- Regenerate after changing scope or filters; the previous result cannot be exported once it is stale.
Important: Submitted and completed records are different. Machinery shortlists are not signed rentals. Reports show authorised data, not permission to edit underlying records.
Buy additional file uploads
- Open your company's subscription/upload allowance controls in Settings.
- Review your remaining upload balance and select the number of additional files to buy.
- Review the amount and complete the purchase through PayFast.
- Return to SSS and check the upload balance after PayFast confirms payment.
Important: Additional uploads cost R1.80 per file. App-generated phone signatures and supported app-generated photos are excluded from the file-upload allowance; uploading company evidence is separate.
Change or cancel your subscription
- Open Settings → Modules & subscription and review your company's active subscription.
- To add users or capacity, use Company capacity or User management; review the pro-rata charge due now on PayFast and the recurring amount for your next renewal.
- To stop renewal, use Cancel subscription and confirm the cancellation.
- Check the subscription's updated status and paid-period end date.
- If your paid period has ended, return to Pricing and subscribe again. Expired plans do not prevent a new checkout.
Important: Customers may manage only their own subscriptions. Cancellation keeps access through the paid period. Refunds, payment records and commissions remain SSS Admin-only. Payments are taken securely by PayFast. Unused capacity and users are reduced automatically, lowering your next renewal without a part-period refund.
Get help or report a problem
- Open Help in the app for the how-to guides or ask the SSS Support Assistant a question.
- If a function does not work as expected, choose Log a support query immediately.
- Include the page, project/record, what you tried and what happened; attach relevant evidence without exposing passwords or private access codes.
- Use Suggest an improvement or Ask to be contacted for those requests.
Important: Checking a guide or chatting is not itself a submitted support query; confirm that your request was sent.
Ready to simplify safety and compliance?
Bring your people, projects, assets, documents, inspections and certificates together in one connected platform.
